Connections

The function of each wire and how to connect the wires depend on the chosen flash pattern setting.

Table 1. Connections if flash pattern Double or Triple is selected

Wire	Functions	Connect to
Black	Power supply	Good and suitable ground
Red	Power supply Lamp on/off	10-30 V DC via a 5 A fuse Sourcing output (+) of an I/O unit or via a switch
White	Synchronizing the flashing of two or more lamps	Sync cable of the other lamp
Blue	Day-and-night function	Sinking output (-) of an I/O unit or via a switch to ground. When activated, the lamp dims down to night level.

Table 2. Connections if flash pattern Steady burn 1 is selected

Wire	Function	Connect to
Black	Power supply	Good and suitable ground
Red	Power supply	10-30 V DC via a 5 A fuse
White	Lamp on/off	Sinking output (-) of an I/O unit or external flasher.
Blue	Day-and-night function	Sinking output (-) of an I/O unit or via a switch to ground. When activated, the lamp dims down to night level.

Table 3. Connections if flash pattern Steady burn 2 is selected

Wire	Function	Connect to
Black	Power supply	Good and suitable ground
Red	Power supply Lamp on/off	10-30 V DC via a 5 A fuse Sourcing output (+) of an I/O unit or external flasher.
White	Synchronizing the flashing of two or more lamps	Sync cable of the other lamp
Blue	Day-and-night function	Sinking output (-) of an I/O unit or via a switch to ground. When activated, the lamp dims down to night level.

L54 Tinted Lens